|
The BTS is an automatic battery
discharge test set designed to enable unattended discharge
tests to be performed on standby batteries. It is widely
acknowledged that a capacity test as performed by a controlled
constant current discharge gives the best indication as to the
health of a standby battery and its ability to perform to its
specification.
A test is performed by entering on a PC
the discharge current, discharge time, minimum allowable
battery voltage and the voltage measurement record rate.
Optional alarm settings can also be entered, the alarm outputs
being connected into the local alarm scheme to notify the
operator if attendance is necessary. Once the test has been
initiated by the PC, the PC can be disconnected and the
discharge unit will perform the test with no operator
involvement. As the battery voltage falls during the discharge
the unit adjusts the load on the battery such that the
discharge current is maintained constant. The discharge
continues until the time limit is reached or the battery
voltage drops below that previously entered as the minimum.
The test set stores test results internally in non-volatile
memory and the PC can be reconnected later so results can be
downloaded and analysed.
Features -
Software
- Windows
3.11/95/98/NT
- Fully Automatic or Manual
Testing
- Lifetime software
updates
- Comprehensive results
archiving, presentation and printing as well as
error/trend analysis
|
- Complete on-line operating
manual
- Full traceability of
results to test set hardware, software and calibration
data
- Test Templates allows the
test set to be rapidly set up
|
Features -
Hardware
|
Discharge
Ratings
- 0.1 to 99.9 Amps discharge
for 24, 48 and 125 Volt batteries
- 0.1 to 50.0 Amps discharge
for 220 Volt batteries
- Discharge time 3 minutes
to 10 hours
|
Voltage
Monitoring
- Two Voltmeters: Battery
Terminal and uncommitted Voltage input
- 30, 150, and 300 Volt
ranges - auto selected
- 10 second record
rate
|
|
Miscellaneous
- 4 changeover alarm
outputs
- Software based
calibration
- Comprehensive overload
& thermal protection
|
|
|
General
- Universal Supply: 90-260V
DC or 45-65Hz AC, 100W, Power Factor Corrected
- All inputs/outputs are
galvanically isolated from each other and
chassis
- Dimensions: 510x270x520mm,
Weight: 28.5Kg
- Operating Temperature:
0-45°C
- CE Marked, Tested to
EN50081-2 (emissions) & EN50082 (immunity)
|
|
Ask
for BTS demo
program
Download the full brochure -
BTSbrochure.PDF (0.6Mb)
 Download FREE PDF reader
|
|
|
| 
| 
| 
RETURN
TO PTS-TECH HOME PAGE
